Use a MicroSD or SD with your SCSI controller.
This adapter allows you to use SD or microSD card media instead of a real SCSI device. Compatible with a vast variety of SCSI controllers. Including the Amiga motherboard controllers, 3rd party controllers as the A590 or the Blizzard/Cyberstorm SCSI controllers, Atari, Apple, PC, keyboards/samplers, CNC machines, scientist instruments, etc.
SCSI2SD emulates a SCSI-I or SCSI-2 hard drive using a microSD or SD memory card (both stlot assembled). Each SCSI2SD purchase includes a fully assembled and tested circuit board, ready for use.
Features:
• Read/Write speed: 2.5Mb/s
• Supports asynchronous transfers only
• Built-in active terminator.
• Emulates up to 4 SCSI devices simultaneously
• Supports sector sizes from 64 bytes to 8192 bytes
• Firmware updatable over USB
• Highly configurable over USB• Selectable SCSI ID
• Selectable parity support
• Enable/disable Unit Attention Condition
• Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
• Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities)
• External LED connector
• Emulates up to 4 SCSI devices simultaneously
• Supports sector sizes from 64 bytes to 8192 bytes
• Firmware updatable over USB
• Highly configurable over USB
• Selectable SCSI ID
• Selectable parity support
• Enable/disable Unit Attention Condition
• Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
• Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities)
• External LED connector
• SCSI interface: SCSI-2 Narrow 8-bit 50-pin connector. Supports asynchronous transfers only.
• SD Card interface: Standard SDSC (1GB maximum size)
• Power input: 5V via standard molex drive connector or USB.
Please, check the compatibility list here.
Warranty: 2 years.
Manual: not included.
Please note our SCSI2SD board and 3,5" bay adapter are distributed under the GPL V3+ licence. https://www.gnu.org/licenses/gpl-3.0.en.html. Please visit the SCSI2SD page at http://www.codesrc.com/mediawiki/index.php?title=SCSI2SD, where you also will find the GPL3+ software source code and original source files.
Sources/designs of our SCSI2SD version and the 3,5" bay adapter are freely available on this page, by clicking over the "Download" tab.