Buddha IDE Zorro II / III

Re-stock: sin fecha de entrada. Nueva versión mejorada! Para cualquier Amiga con slots Zorro II o Zorro III. Buddha es una controladora IDE para Amiga 2000, 3000 (T), 4000 (T), y cualquier Amiga con slots Zorro. Soporta hasta cuatro dispositivos IDE. La nueva controladora Buddha ha sido actualizada con nuevos componentes electrónicos e incorpora un vasto paquete de software.

Más detalles

Producto no disponible

Indicarme cuando esté disponible

Añadir al carrito
58,99 € IVA incl.

Controladora Buddha Flash IDE para todos los modelos de Amiga con slots Zorro.

The 20-year anniversary edition of the Buddha Flash is exactly what the Buddha has always been: A top-class IDE controller. Technical data remains the same: Buddha is an IDE-controller for all Amiga computers with Zorro-slots. In addition to two IDE-ports, there's a clock port for hardware originally designed for the A1200 computer.A new feature of the controller is that the IDE ports can supply power for a DOM module. Modern 3.3V technology saves power and only causes moderate temperature increase inside the computer.

All known features of the IDE controller are still available:

• Autoboot with Kickstart V1.3, 2.0 and 3.1
• Autoboot from ZIP and LS120 drives
• Two IDE-Ports for up to four IDE device
• Compatible with almost all IDE/Atapi devices:
- Hard Disks
- SSD drives
- DOM modules (40-pin)
- Indistrial-CF cards (with Adapter, not included)
- Atapi CD-Roms (any speed)
- Atapi CD-changers
- Atapi CD-Writer (with MakeCD)
- Syquest removable drives
- LS120 (the 120MB-floppy, aka "A-drive")
- IDE ZIP drives

Performance: Even with slow devices, transfer rates of 2.2 MBytes/second(*) can be achieved. The raw transfer rate is only limited by the Zorro-2 bus, which is 3.58 MBytes/second.(**) 

The drivers have been programmed by Oliver Kastl, who has set highest standards with the "ALF" drivers and the IDE-fix (later "IDE-max") software. The software includes the whole IDE-package from Elaborate Bytes: Cache CD Filesystem, Harddisk Autopark, CD-changer tool, CD-32 emulator (only for AGA-chipset).

Harddisks or solid-state media can be prepared with HDToolbox or the iComp-installer, which complements the software package that comes with the 20-year anniversary edition of the Buddha controller: We have licensed the OS versions 1.3, 2.1 and 3.1 from Hyperion, and include them on a 128MByte-DOM which is included in the price. The automatic installer makes preparing a harddisk easier than any other software did before: Just a few mouse clicks, and even the rather complicated process of installing media with a 64-bit file system is completed. Our installer brings the ease of use of today's computers to the computer system that introduced simple usability to the computer market in the 1980s.

The Linux- and NetBSD drivers for older versions of the Buddha controller can be used on this new version without change.

(!): Caution, UDMA 80pin cables cannot used with this controller.
(*): measured with the classic "Quantum Bigfoot" harddisk.

(**): performance depends on installed accelerator. Maximum transfer rate can be reached with 68020 and 68030 CPUs.

Package includes:

• Buddha Flash IDE Controller
• 128MB DOM
• Printed Short Manual

This product is covered by 2-year manufacturer warranty.
Instructions included.

Sea el primero en hacer una consulta sobre este producto!

Consulta sobre el producto

*Campos Requeridos

La consulta se ha enviado correctamente


No hay productos

0,00 € Transporte
0,00 € Total


Sistemas de pago