Back

Controller IDE, Elbox FastATA A1200 MK-V CF/SATA

With the New FastATA 1200 MK-V controller you can now take advantage of the latest low-cost, high-capacity SATA/ATA/IDE/EIDE devices like Hard Drives, Solid State Drives (SSD), Compact Flash cards, CD-ROM, CD-RW, DVD drives, ZIP drives, LS-120 drives, etc. The Clockport Riser is available as option and may be necessary if you use a device connected to the A1200 clock port.

More details

Reference:
59
Quantity:
Availability:
In stock

119,90 € tax incl.

Elbox A1200 MK-V CF/SATA/IDE high speed controller (16.6 MB/s).

With the new FastATA 1200 MK-V controller you can now take advantage of the latest low-cost, high-capacity SATA/ATA/EIDE devices like Hard Drives (up to 2TB), Solid State drives (SSD), Compact Flash cards, CD-ROM drives, CD-RW drives, ZIP drives, LS-120 drives, etc.

FastATA 1200 MK-V CF/SATA is a successor of the award-winning FastATA 1200 controller. The new controller offers enhanced performance with lower processor load when compared against earlier version. All software you need is supplied on floppy disk: the last driver (v11.2) and the last version of Allegro CDFS (v3.8). FastATA is compatible with AmigaOS 3.0, 3.1, 3.5 and 3.9, and 4.1.

The minimum hardware configuration is: Amiga 1200 with a 4MB RAM expansion card. 
The recommended configuration is: Amiga 1200 with turbo card with and 16MB RAM. 

The Clockport Riser is available as option and may be necessary if you use a device connected to the A1200 clock port, and if the connector of the ribbon for connecting this device is not thin enough to be installed with the FastATA 1200 controller. 

The FastATA 1200 MK-V CF/SATA controller features represent the ultimate technology in its category:

  • Fast transfer rate of up to 16.6MB/s 
    The FastATA MK-V controller with its maximum transfer rate of 16.6MB/s in the PIO 4 mode offers a huge capacity reserve for fast mass storage devices, especially for fast hard drives. Therefore, applications may run much faster if they can count on fast access to large data files. 

  • Support for ATAPI standard devices 
    The FastATA 1200 MK-V controller implements the ATAPI standard as well, for use with devices like CD-ROM, CD-R, CD-RW, ZIP, LS-120, DVD drives. This enables connection of ATAPI-standard devices to the Amiga with no need of installing additional software. 

  • Two buffered and terminated EIDE ports 
    The controller operates with two EIDE ports, which enable installation of up to 4 IDE/EIDE/ATAPI devices. Both controller ports are fully buffered and terminated in accordance with the recommendations set forth in the ATA-3 specification. 
    Compatible with PIO-0, PIO-3, PIO-4, ATA/33, ATA/66, ATA/100 ATA/133 devices. 

  • Fully compatible with HDDs of over 4GB 
    Limitations on support for >4GB HDDs have been eliminated in the FastATA 1200 MK-V controller. The FastATA MK-V 1200 CF/SATA controller may be used with >4GB HDDs independently of the installed filesystem. 

  • 48-bit LBA capability 
    The 48-bit LBA (Logical Block Addressing) capability assures support for hard drives beyond the 137GB (up to 2TB).

  • Automatically configured devices 
    The controller automatically recognises any device attached to it, negotiates the highest possible data transfer rates, switches the device into its appropriate mode and transfers data at the maximum transfer rate. 

  • Automatic processor type recognition 
    The FastATA 1200 MK-V controller automatically detects type of processor and optimises and modifies some software routines in order to achieve the highest possible data transfer rate between the controller and the computer memory. 

  • 32-bit access 
    The computer recognises the controller as a 32-bit device configured in the motherboard IDE port space. Full 32-bit operation of the controller combined with very efficient software guarantee significant increase in the speed of your computer. 

The FastATA 1200 MK-V controller is compatible with all the major A1200 turbo card models and memory expansion cards. 

The FastATA MK-V 1200 controller is designed for operating with the following turbo cards: Blizzard PPC/060, Blizzard PPC/040, Blizzard 1260, Apollo 1260, Blizzard 1240, Apollo 1240, Blizzard 1230 (III, IV), Apollo 1230, GVP 1230, Elbox 1230 and M-Tec 1230. 

The new FastATA MK-V 1200 controller has been designed to fit inside the Amiga 1200 in its standard casing or in any Tower-type casing. 

The FastATA MK-V 1200 controller has to be installed on the Amiga 1200 motherboard. The two boards that constitute the controller are inserted in the ROM sockets and on top of the GAYLE chip. 

All installation steps are shown in FastATA MK-V 1200 Quick Installation Guide. 

The FastATA MK-V 1200 controller is available with a standard software pack including FastATA software. 

FastATA software bundled with FastATA MK-V CF/SATA 1200 controllers provides support for:

• HDD drives • CD-ROM drives,
• CD-R drives • CD-RW drives,
• ZIP drives • LS-120 drives 

The FastATA 1200 MK-V pack includes also the fastest Amiga CDfilesystem - Allegro CDFS.

Package contents:

• Fast ATA 1200 MK-V CF/SATA controller
• Floppy disk with AllegroCDFS and FastATA software pack.
• 46-cm 80-wire ATA-66/100/133 cable
• User Manual


Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Welcome

No products

0,00 € Shipping
0,00 € Total

Bank Transfer

Payment systems

8023
Product reviews