For Amiga 500 and Amiga 2000 with PiStorm. Framethrower is a video output solution that works as a scandoubler, capturing the native 15kHz signal and automatically switching between OCS/ECS and RTG screen modes. Framethrower eliminates the need for multiple video outputs by providing both modes through the Raspberry Pi HDMI connector.

For Amiga 500, Amiga 500+, and Amiga 2000. PiStorm is an adapter which uses a Raspberry Pi to provide a CPU accelerator, RTG graphics card, hard disk interface, Wifi, and others enhancements. CPU relocator, Raspberry Pi 3A+, and a pre-configured SD card are available as option. If you want to add 512 or 1MB of CHIP RAM, please check our Trapdoor Memory Expansions for Amiga 500 and Amiga 500 Plus.

For modern computers and classic Amiga systems (A500 / A2000 / A3000 / A4000 / CDTV / CD32).

Amiga-style mechanical keyboard with an optional pre-manufactured 3D-printed and painted enclosure, reinforced metal chassis, and optional universal controller supporting direct connection to A500, A2000, A3000, A4000, CD32, CDTV, and USB systems.

Includes advanced anti-ghosting electronics for flawless simultaneous keypresses and reliable operation across all supported platforms, along with a detailed manual and a three-year warranty.

Pre-orders open – First, second, third, fourth, fifth and sixth batch sold out. Seventh batch available on June 19.

Terrible Fire 536 accelerator has been designed to be installed inside Amiga 500/500+, or Amiga 2000. It provides a Motorola 68030 CPU clocked at 50 MHz, 64MB of RAM, and a 2,5" IDE connector for hard drives and CF adapters. If you want to add 512 or 1MB of CHIP RAM, or a RTC, please check our Trapdoor Memory Expansions for Amiga 500 and Amiga 500 Plus. They are the perfect complement to the Terrible Fire Accelerator.

RGB2HDMI Angled interface for A500/500+ is an adapter which uses a Raspberry Pi to covert the RGB signal of your Amiga 500 and 500+ to digital HDMI. This solution adds pixel-perfect HDMI output to Amiga computer and lets you connect monitors and TVs with an HDMI input. RGB2HDMI software is supplied into the optional SD card. The necessary Raspberry Zero board is available as a product option.

New V2 version. microSD card reader for all Amiga models. SDBox V2 is a small device that plugs on the Amiga's parallel port and lets you use standard microSD cards. Please note SDBox is very picky with SD cards. A 100% compatible SD card is available as option.

For Amiga 500/1000/2000/CDTV. Designed to be installed on top of the CPU socket, GottaGoFastRAM provides 8MB of Autoconfig Fast RAM to your Amiga 500, 1000, 2000 or CDTV. It is also an excellent option for the Terrible Fire 534 accelerator, allowing you to get a total of 12MB (4+8) of Fast RAM. The IDE68K + GottaGo FastRAM 8MB card includes an IDE interface and it is available here.

For Amiga 500/1000/2000/CDTV. Designed to be installed on top of the CPU socket, IDE68K + GottaGoFastRAM provides 8MB of Autoconfig Fast RAM and Autoboot IDE controller to your Amiga 500, 1000, 2000 or CDTV. Compatible with Kickstart 3.2, 3.X, 3.1, 2.05, and with our modified Kickstart 1.3 (available as option). Re-stock of the CDTV version: June 12th.

For Amiga 500/600/1200. The internal version of Gotek let you mount the drive inside your Amiga 500, 500+, 600, or A1200 case, and give you full access to the controls from the outside. This version comes with two LEDs, a buzzer which emulates the floppy drive sound. OLED display is available as option. The Gotek Floppy Emulator allows you use USB memory sticks instead floppy disks on Amiga and other systems. This device is flashed with the last FlashFloppy firmware for Amiga/Atari/Amstrad/Sinclair/Acorn/IBM-PC computers or the last universal HxC firmware for Amiga, Atari, Amstrad, Sinclair, and any computer or device with a Shugart/PC floppy interface.

Terrible Fire 534 accelerator has been designed to be installed inside Amiga 500/500+, or Amiga 2000. It provides a Motorola 68030 CPU and a 68882 math coprocessor clocked at 33, 40, 48, or 50 MHz, 4MB of RAM, and a 2,5" IDE connector for hard drives and CF adapters. If you want to add 512 or 1MB of CHIP RAM, please check our Trapdoor Memory Expansions for Amiga 500 and Amiga 500 Plus. They are the perfect complement to the Terrible Fire Accelerator.