Back

SCSI a Micro SD adapter

Stock: junio de 2018. Usa una MicroSD con tu controladora SCSI. Este adaptador te permitirá usar una tarjeta SD en lugar de un dispositivo SCSI real. Compatible con una gran variedad de controladoras SCSI. Incluyendo las de las placas base de Amiga, controladoras de terceros fabricantes como la A590 o la Blizzard/Cyberstorm SCSI, Atari, Apple, PC, samplers, máquinas CNC, instrumental científico, etc.

Más detalles

Referencia:
59-SCSI-SD-1
Disponibilidad:
Producto no disponible


Indicarme cuando esté disponible

Añadir al carrito
63,25 € IVA incl.

Usa una MicroSD con tu controladora SCSI.

Este adaptador te permitirá usar una tarjeta SD en lugar de un dispositivo SCSI real. Compatible con una gran variedad de controladoras SCSI. Incluyendo las de las placas base de Amiga, controladoras de terceros fabricantes como la A590 o la Blizzard/Cyberstorm SCSI, Atari, Apple, PC, samplers, máquinas CNC, instrumental científico, etc.

SCSI2MSD emulates a SCSI-I or SCSI-2 hard drive using a micro-SD memory card. Each SCSI2SD purchase includes a fully assembled and tested circuit board, ready for use.

Features:

• Read/Write speed: 2.5Mb/s
• Supports asynchronous transfers only
• Built-in active terminator.
• Emulates up to 4 SCSI devices simultaneously
• Supports sector sizes from 64 bytes to 8192 bytes
• Firmware updatable over USB
• Highly configurable over USB• Selectable SCSI ID
• Selectable parity support
• Enable/disable Unit Attention Condition
• Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
• Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities)
• External LED connector
• Emulates up to 4 SCSI devices simultaneously
• Supports sector sizes from 64 bytes to 8192 bytes
• Firmware updatable over USB
• Highly configurable over USB
• Selectable SCSI ID
• Selectable parity support
• Enable/disable Unit Attention Condition
• Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
• Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities)
• External LED connector
• SCSI interface: SCSI-2 Narrow 8-bit 50-pin connector. Supports asynchronous transfers only.
• SD Card interface: Standard SDSC (1GB maximum size)
• Power input: 5V via standard molex drive connector, USB, or SCSI BUS po•SDHC, SDXC (up to 200GB)

Please, check the compatibility list here.

Warranty: 2 years.
Manual: not included.

Bienvenido

No hay productos

0,00 € Transporte
0,00 € Total