Back

SCSI to Micro SD adapter

Use a MicroSD with your SCSI controller. This adapter allows you to use SDCard media instead of a real SCSI device. Compatible with a vast variety of SCSI controllers. Including the Amiga motherboard controllers, 3rd party controllers as the A590 or the Blizzard/Cyberstorm SCSI controllers, Atari, Apple, PC, keyboards/samplers, CNC machines, scientist instruments, etc.

More details

Reference:
59-SCSI-SD-1
Quantity:
Availability:
In stock

63,95 € tax incl.

Use a MicroSD with your SCSI controller.

This adapter allows you to use SDCard media instead of a real SCSI device. Compatible with a vast variety of SCSI controllers. Including the Amiga motherboard controllers, 3rd party controllers as the A590 or the Blizzard/Cyberstorm SCSI controllers, Atari, Apple, PC, keyboards/samplers, CNC machines, scientist instruments, etc.

SCSI2MSD emulates a SCSI-I or SCSI-2 hard drive using a micro-SD memory card. Each SCSI2SD purchase includes a fully assembled and tested circuit board, ready for use.

Features:

• Read/Write speed: 2.5Mb/s
• Supports asynchronous transfers only
• Built-in active terminator.
• Emulates up to 4 SCSI devices simultaneously
• Supports sector sizes from 64 bytes to 8192 bytes
• Firmware updatable over USB
• Highly configurable over USB• Selectable SCSI ID
• Selectable parity support
• Enable/disable Unit Attention Condition
• Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
• Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities)
• External LED connector
• Emulates up to 4 SCSI devices simultaneously
• Supports sector sizes from 64 bytes to 8192 bytes
• Firmware updatable over USB
• Highly configurable over USB
• Selectable SCSI ID
• Selectable parity support
• Enable/disable Unit Attention Condition
• Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
• Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities)
• External LED connector
• SCSI interface: SCSI-2 Narrow 8-bit 50-pin connector. Supports asynchronous transfers only.
• SD Card interface: Standard SDSC (1GB maximum size)
• Power input: 5V via standard molex drive connector, USB, or SCSI BUS po•SDHC, SDXC (up to 200GB)

Please, check the compatibility list here.

Warranty: 2 years.
Manual: not included.

Welcome

No products

0,00 € Shipping
0,00 € Total